Anping Shuangmai Metal Products Co., Ltd.
Main products:Metal Lath,Bar Tie,Rebar Tie Wire
Contact Us
  • Contact Person : Ms. Lee Kathy
  • Company Name : Anping Shuangmai Metal Products Co., Ltd.
  • Tel : 86-311-87769858
  • Fax : 86-311-87769158
  • Address : Hebei,hengshui,Wanggezhuang Industrial Zone, Anping county, Hengshui city, Hebei province, China
  • Country/Region : China
  • Zip : 053600

610mm X 2200mm Rib Lath

610mm X 2200mm Rib Lath
Product Detailed
Rib Lath 1. Material: SGCC 2. Finish: Hot-dipped Galvanized 3. Size: 610mm X 2200mm 4. Thickness: 0.2mm-0.5mm

Rib Lath is Expanded Metal lath stiffened by longitudinal steel ribs, formed in the same sheet of metal.  The mesh areas of the lath are expanded by cutting and stretching in the sheet of metal, the ribs being simultaneously roll-formed.  The furring design of the mesh provides an execellent background plaster for construction of partitions, suspended ceilings and refurbishment works.  The advantages of rib lath over metal lath is that the support centres can be increased or widened.


Galvd Rib-Lath is extensively used:

>as a Plaster Backgroud for:

- Partitions

- Structural (Steel Work Encasement

- Suspended Ceiling

- Arch Formation

- Construction Joint for Shallow

>to refurbish damaged or aged masonry walls, Slab, Retrofiting work, etc..


* Rib-Lath must fixed with the apexes of the ribs in contact with the support or the backing.

* Rib-Lath should be lapped at the sides wire tied at intervals not exceeding 150mm.

* At the end of the sheets, the Rib-Lath should be overlapped with at least 100mm (4" ).

610mm X 2200mm Rib Lath

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.